Muffle Furnaces
Yamato Scientific America, Inc. Yamato 7.5L Standard Muffle Furnace with Communication Port, 115V
Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness w/a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features: self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options: exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded w/long life R-thermocouple sensors. Designed w/ communication port. Temperature range: 100~1150°C. *Item does not come with a cord/plug. Must be purchased separate.
Yamato Scientific America, Inc. Yamato 7.5L Standard Muffle Furnace with Communication Port, 220V
Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C.
Yamato Scientific America, Inc. Yamato 30L Standard Muffle Furnace with Communication Port, 220V
Standard 30L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C.
NABERTHERM INC LE1/11/R7,TMAX 1100C 120V
This economy muffle furnace is designed for many lab applications. Features: Tmax 1100 °C, working temp. 1050 °C, heating from two sides from heating elements in quartz glass tubes, dual shell furnace housing of rust-free stainless steel, Insulation made of non-classified fiber material
NABERTHERM INC Ashing furnaces designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis.
Ashing furnace LV ../11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.
1100C LARGE MUFFLE FURNACE
- Heating Chamber Dimensions: 16 in x 16 in x 16 in (40 x 40 x 40 cm)
- Chamber Capacity: 64 liters (2.37 cu ft)
- Continuous Operating Temperature: 100-1100 °C
- Maximum Temperature (Short Term): 1200 °C (under 1 hour)
- Temperature Stability at 1000 °C: +/- 1 °C
- Temperature Uniformity at 1000 °C: +/- 5 °C
- Max Heating Rate: 20 °C/min
- Power Voltage: AC 208-240 V, Single phase, 50/60 Hz
- Power Wattage: 7.5 kW
- Current Rating: 34 A
- Insulation Material: High-purity alumina fiber
- Structure: Heavy-duty double-layer with cooling fan
- Vent Port: Built-in 1/4 in barbed gas inlet/outlet (rear)
- Safety Features: Door interlock
- Temperature Controller: FA-YD518P-AG (primary, 1 source) / Digital (primary, 2 sources)
Azzota Corp CERAMIC FIBER MUFFLE FURNACE, 1200℃, 2L, 1500W, 110V, LCD display, Inner Chamber size (W*L*H): 120*200*80mm
CERAMIC FIBER MUFFLE FURNACE, 1200℃, 2L, 1500W, 110V, LCD display, Inner Chamber size (W*L*H): 120*200*80mm
MUFFLE FURNACE 16X12X12
- Max working temperature: 1200 °C
- Max constant working temperature: 1100 °C
- Chamber dimensions (W x D x H): 16 x 12 x 12 in
- Chamber volume: 1.33 cu ft
- Heating element: Kanthal A1 2.0 resistance coil wire
- Refractory lining: Mitsubishi 1500-grade alumina fiber
- Electrical requirements: 208-240 VAC, 50/60 Hz, single-phase
- Controller: Eurotherm 3204 or Shimaden FP93
- Controller segments: 8 or 40 segments
- Maximum heating rate: < 15 °C/min
- Thermocouple type: K
- Control type: Microprocessor-based self-tuning PID
- Computer interface: Built-in for PC connection
- Safety features: Overheat and power failure protection
- Certification: ETL tested, UL, CSA, and CE certified
- Internal housing: Double-walled steel
- Warranty: 1 year
- Installed heating power: 4 kW